[Elecraft] Sub RX no work

[K4ia]

Check your filter locations and make sure they are "selected". As I recall you must instal the filters in slot 1 then 2 then 3. In other words, no skipping over slots.  

Craig Buck

On Nov 28, 2012, at 6:19 PM, "Mike Sanders" <k0az at centurytel.net> wrote:

> Well, I think I have found it. I have not gotten
> the filters selected for the sub RX and the rig
> keeps going back to a FL1 position. I only
> have FL2 and FL4 populated with 2.8 and
> 400hz respectively. When I go into Bset I
> can get to those filters and the RX is FB
> but when I get out of Bset it goes back to
> one of the filter slots I do not have.
> Apparently I need to deselect FL1, 3 and
> 5 from the sub RX. Not sure How to do that?
> Thanks for the tips so far. Any help on the
> filter issue appreciated. 73 again.
> 
> 
> 
>                    Mike Sanders
>                        KØAZ
> 
> 
> 
> 
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Cady, Fred
> Sent: Wednesday, November 28, 2012 16:55 PM
> To: Elecraft Reflector
> Subject: Re: [Elecraft] Sub RX no work
> 
> 
> Hi Mike,
> Make sure the sub rx and the main rx are on the same antenna. Turn Sub on
> and then Hold RX until you see MAIN displayed, not AUX.
> 73 and cheers,
> Fred KE7X
> 
> Fred Cady
> fcady at ieee dot org
> 
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
>> bounces at mailman.qth.net] On Behalf Of Mike Sanders
>> Sent: Wednesday, November 28, 2012 3:51 PM
>> To: Elecraft Reflector
>> Subject: [Elecraft] Sub RX no work
>> 
>> Greetings All, Well I have just installed a sub RX in a late
>> K3 (67xx). Before I go back into the radio and quadruple
>> check my work I just have to ask if I am missing something
>> in config.
>> I have audio and control of the sub RX and can even hear
>> signals through it but very very weak compared to the Main.
>> All seems OK but just very poor RX. I have selected the
>> ATU as source of antenna and have my connections there.
>> (I will go in later and see if I have any thing mis/dis connected).
>> Am I missing something in config? I have two filters installed
>> in the sub and NO BPF. No error messages and again it
>> seems to respond to everything input to it. Even receives
>> just poorly. Thanks for any help.  73, Mike
>> 
>> 
>>                        Mike Sanders
>>                             KØAZ
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1427 / Virus Database: 2629/5424 - Release Date: 11/28/12
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html