[Elecraft] Sub RX no work

[Dale Boresz]

Mike,

I had a similar issue, and after I re-ran the KSYN3 calibration a second 
time, all was well. In retrospect, I think I may have inadvertently 
stopped it the first time around.

73, Dale
WA8SRA



On 11/28/2012 5:51 PM, Mike Sanders wrote:
> Greetings All, Well I have just installed a sub RX in a late
> K3 (67xx). Before I go back into the radio and quadruple
> check my work I just have to ask if I am missing something
> in config.
> I have audio and control of the sub RX and can even hear
> signals through it but very very weak compared to the Main.
> All seems OK but just very poor RX. I have selected the
> ATU as source of antenna and have my connections there.
> (I will go in later and see if I have any thing mis/dis connected).
> Am I missing something in config? I have two filters installed
> in the sub and NO BPF. No error messages and again it
> seems to respond to everything input to it. Even receives
> just poorly. Thanks for any help.  73, Mike
>
>
>                          Mike Sanders
>                               KØAZ
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>