[Elecraft] Sub RX no work

[Cady, Fred]

Hi Mike,
Make sure the sub rx and the main rx are on the same antenna. Turn Sub on and then Hold RX until you see MAIN displayed, not AUX.
73 and cheers,
Fred KE7X

Fred Cady
fcady at ieee dot org 

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Mike Sanders
> Sent: Wednesday, November 28, 2012 3:51 PM
> To: Elecraft Reflector
> Subject: [Elecraft] Sub RX no work
> 
> Greetings All, Well I have just installed a sub RX in a late
> K3 (67xx). Before I go back into the radio and quadruple
> check my work I just have to ask if I am missing something
> in config.
> I have audio and control of the sub RX and can even hear
> signals through it but very very weak compared to the Main.
> All seems OK but just very poor RX. I have selected the
> ATU as source of antenna and have my connections there.
> (I will go in later and see if I have any thing mis/dis connected).
> Am I missing something in config? I have two filters installed
> in the sub and NO BPF. No error messages and again it
> seems to respond to everything input to it. Even receives
> just poorly. Thanks for any help.  73, Mike
> 
> 
>                         Mike Sanders
>                              KØAZ
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html