[Elecraft] CW Skimmer & K3

[Sam Morgan]

here is the direct link to Tony's site called five dash inc
where he *IS_STILL* selling the SoftRock needed for the K3 if tap: 
http://tinyurl.com/br28abo

<quote>
For special IF applications: Crystals for some special IF frequency applications 
are available. An IF Special Lite II receiver has a crystal whose center 
frequency is typically 10kHz to 15kHz above or below the target IF frequency. 
The Lite II can then be used to monitor the signals in the IF spectrum of the 
target receiver. This provides a way of quickly seeing what signals are 
available near to the frequency where the target receiver is tuned. If an 
additional IF center frequency option is chosen below, the crystal and any 
additional parts necessary for the Lite II to be built for the chosen frequency 
will be included in addition to the standard Lite II Combined Receiver kit. Band 
specific component values for IF frequencies may be found here.
</quote>

also reference links:
Links to more info:
http://wb5rvz.com/sdr/  WB5RVZ's Documentation site about all Tony's SDR's
http://wb5rvz.com/sdr/sr_lite_ii/   SoftRock Lite II docs
http://fivedash.com/  Tony KB9YIG's site

http://cliftonlaboratories.com/  Clifton Labs site
http://www.cliftonlaboratories.com/z10010_bandpass_filter.htm   Bandpass filter
http://cliftonlaboratories.com/z10000_buffer_amp.htm   Z10000 Buffer Amp

http://www.telepostinc.com/soundcards.html   sound card recommendations


On 11/28/2012 11:54 AM, David Gilbert wrote:
>
> That's still limited to ± 12 KHz for use with CW Skimmer.
>
> By the way, I thought I read somewhere recently that the Softrock Lite for use
> with the K3 IF was no longer offered by Tony although I could be wrong, about
> that.  If anyone knows for certain, please correct me.
>
> Dave   AB7E

-- 

GB & 73
K5OAI
Sam Morgan