[Elecraft] K3 Problems

[Dick Dievendorff]

Can you try the steps in K3 Utility Help, Troubleshooting,  MCU Load
Failure, and reload load all firmware?   


73 Dick, K6KR 


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of chas
Sent: Monday, November 26, 2012 4:48 AM
To: don at w3fpr.com; elecraft; Gary Gregory
Subject: Re: [Elecraft] K3 Problems

On 26/11/2012 12:19, Don Wilhelm wrote:
> Do you have a saved K3 configuration file?  If so, do an EEINIT (see 
> Parameter Initialization in the manual) and reload the configuration.
>
> That will give you something to accomplish while waiting for the 
> support people to wake up this morning.
>
> 73,
> Don W3FPR

Thank you Don, but you need to read my latest reply to Gary.
The SHIFT LO NORM button is not working correctly - so what you are both
suggesting will not work.

I have read the Parameter Initialisation page in the manual.

I have tried reinstalling the Configuration Menu.

Until you appreciate that the K3 front panel buttons are all totally
corrupted then any cure to this problem cannot be found.

Charles - M0BIN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html