[Elecraft] K3 Setting Audio!

[Don Wilhelm]

Alfredo,

The instructions are suitable for any microphone.
Set the compression to zero, then adjust the mic gain to give an 
indication on the ALC meter of 5 to 7 bars. Do that in TX TEST mode so 
you do not bother your ham neighbors.

Then listen to your own signal in the monitor and set the compression to 
the desired level.

When you change microphones, go through the same process because all 
mics are different.

Jim Brown K9YC has suggested that you go into TX EQ and turn the bottom 
two bands to as low as you can get them to reduce the power-robbing low 
frequencies that contribute nothing to the intelligence of a signal.

73,
Don W3FPR

On 11/22/2012 7:09 PM, Alfredo Vélez WP3C wrote:
> Hi
>
> Can someone give me a website where i can find an audio setting for elecraft
> K3??  I have Heil HC4 and K3’s Mic. I just want to adjust it… Thanks!
>
>