[Elecraft] PSK31 neophyte needs help please!

[Ham Radio]

Thanks Adrian for sharing this.  Does anyone have the modified Rigcat that 
goes with the Microham Microkeyer 2 that they would be willing to share for 
FLdigi?

Keith
AK6ZZ

-----Original Message----- 
From: Adrian
Sent: Friday, November 23, 2012 7:05 PM
To: elecraft
Subject: Re: [Elecraft] PSK31 neophyte needs help please!

http://vk4tux.no-ip.org/K3%20rigcat/K3.xml

for rigcat option

-----Original Message-----
From: david Moes <dmoes at nexicom.net>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] PSK31 neophyte needs help please!
Date: Fri, 23 Nov 2012 21:57:31 -0500


>
> What do I do to enable fldigi to read the frequency from the K3?
In FLDigi  select Configure and choose rig control.   Then select the
Hamlib tab    In that window check the  "use Hamlib" button, then in the
rig menu box select the "Elecraft K3 (beta)". The Device should be the
com port that the K3 is connected to.  Set the baud rate to the same as
it is set on the K3.   sideband:  to rigmode The rest of the default
values should work.  including PTT via Hamlib command should be checked
   then under Harware PTT tab make sure that all boxes are
unchecked.      At this point click initalize  it should connect  and
you should see the frequency read out.   be sure to click save and close.

If it fails FLDigi may hang and show 'not responding' for half a minute
or so.  if this happens check that the port and baud settings are
correct and that there are no other applications using the same Com Port.

you will find FLDigi will now be able to put the K3 into transmit for
you as well without the PTT connection, this is done through a command
being sent via the serial port  rather than PTT or using the RTS/DTS.

if its working   close the program and reopen it.    this will
permanently save the changes.

rig control is somwhat limited in FLdigi  you can change mode and QSY
if you want more control you can use FLRig.   the windows version is a
little limited vs the Linux version but it still works quite well for
basic rig control.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html