[Elecraft] KAT500 & ports
Dick Dievendorff
dieven at comcast.net
Thu Nov 22 08:41:54 EST 2012
The KAT500 Utility gets its inventory of serial ports from the Windows
operating system, and those are updated by device driver installation. What
does the Windows Device Manager say your ports are?
I plugged the KXUSB (the USB to serial adapter that came with my KAT500)
into a USB hub and device drivers were installed by Microsoft Update (it
took a little while to get them over the internet). Then when I saw a
"device is ready to use" message, I started the KAT500 Utility and it found
the new port. I'm using Windows 7 64-bit
73 de Dick, K6KR
-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Paul Ormandy ZL4PW
Sent: Wednesday, November 21, 2012 11:08 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] KAT500 & ports
Hi all,
Maybe someone with computer nous than me can answer this.
Just hooked up the KAT500 and went to configure with the utility.
However, the utility is only showing ports 3 and 6 as available. Port 3 is
where I have the K3 plugged in and the only spare port I have, which is on
the end of a 4 way USB splitter, is apparently not port 6!
The USB splitter is plugged into port 4, so I removed it and plugged the
KAT500 cable into port 4, expecting the latter show as the available port,
but it still only gave me the options of 3 or 6. I tried another port to no
avail.
Have read the help file tip about the manage facility on My Computer and see
that the device does attach itself to port 6... which it cannot connect to.
BTW, I have no idea which is physically port 6...
Cheers,
Paul
--
Paul Ormandy, ZL4PW, Oamaru, New Zealand
http://www.zl4pw.orconhosting.net.nz/
www.radiodx.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list