[Elecraft] K3 no mod from FP conn

[Jan Erik Holm]

OK Guy,

Well if it works from the rear bias must be off....or???

I have in CONFIG "mic bnd" off ( I think it was).

But will try this tapping "2"

/Jim
-----------
On 2012-11-16 17:01, Guy Olinger K2AV wrote:
> When on MENU:MIC SEL , and with it set to FP.L or FP.H, tapping "2"
> should toggle the bias on and off.   73, Guy.
>
> On Fri, Nov 16, 2012 at 9:40 AM, Jan Erik Holm <sm2ekm at bdtv.se
> <mailto:sm2ekm at bdtv.se>> wrote:
>
>     Before I hassle elecraft support maybe someone on
>     the list can come up with something.
>
>     Just put together a new K3 and I can´t get any mic
>     connection to the FP connector, i e no modulation.
>     It works ok from the rear connector.
>
>     I checked Config / Main and don´t seem to find any
>     errors. Is there anything I could have forgot? Or
>     perhaps it´s just plain faulty.
>
>     The bias is not the issue, it´s turned off.
>
>     One thing, when I measure on the mic audio pin on
>     the connector I seem to have 5 Volts, that puzzles me.
>     I have not tried to measure on the rear connector
>     when that one is switched on.
>
>     Jim SM2EKM