[Elecraft] [KX3] KXPD3 intermittent keying

[T Gahagan]

The website should be www.ke7x.com 

-----Original Message----- 
From: Cady, Fred 
Sent: Wednesday, November 14, 2012 9:12 AM 
To: elecraft at mailman.qth.net 
Subject: [Elecraft] [KX3] KXPD3 intermittent keying 

My KXPD3 started to give some intermittent keying.

Here is my theory:
The connection between the paddle arms contact to the ground that needs
to be closed to complete the circuit is through the pivot pin at the
back of each paddle arm. The pivot pin has one end that is necked-down
and has not been ground to a bright finish. In my paddle, that end was
in the bottom and, I believe, was making intermittent contact. I
reversed the pins, putting the shiny end down and, so far, that seems to
have cured the problem.
I have a picture of the pin in question on my website:
www.kex.com and click on KXPD3 Paddle Intermittent

Cheers,
Fred KE7X

Fred Cady
"The Elecraft K3: Design, Configuration and Operation"


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html