[Elecraft] K3 sensitivity below 40 meters

[Richard Fjeld]

Yes, good point.  I assumed when I should have been more specific.  With the 
P3, I have the best of both worlds.

I 'presume' most K3's are adjusted from the factory per the manual with the 
pre-amp on, at -50 uV = S9.

Rich, n0ce

----- Original Message ----- 
From: "Don Wilhelm" <w3fpr at embarqmail.com>
To: <elecraft at mailman.qth.net>
Sent: Tuesday, November 13, 2012 12:05 PM
Subject: Re: [Elecraft] K3 sensitivity below 40 meters


> The K3 S-meter can be calibrated with either the preamp on or off. I run
> with SMTR  MD set to ABS, and I calibrate the S-meter with the preamp
> off because of that.
>
> 73,
> Don W3FPR
>
>