[Elecraft] K3 with HRD using CW modes

[KD8NNU]

Thanks everyone who replied.

I now have the K3 responding with using PTT and not needing VOX selected.

I also have it so that it is not creating CW from the sound card so that the 
K3 is doing all the work.

This is a great list as I had been asking this question for a few days on 
the HRD formum and this group had me the answer within 1/2 hour of the first 
post this morning.

Now next step is to get CW in my brain so that I don’t need HRD DM780 any 
more for this mode.

Cheers
Don


~73
Don
KD8NNU
-.- -.. ---.. -. -. ..-
-----Original Message----- 
From: Don Wilhelm
Sent: Sunday, November 11, 2012 6:35 PM
To: Gerald Manthey
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 with HRD using CW modes

I do not know what *cwky* might be, but the K3 will respond to a key
closure if VOX is selected.   If VOX is not selected, one must close PTT
or tap the XMIT button to enable the transmit mode before beginning CW
transmission.

73,
Don W3FPR

On 11/11/2012 5:49 PM, Gerald Manthey wrote:
> Yes, vox on mcw. Not needed on cwky.
> On Nov 11, 2012 4:43 PM, "Ian Kahn - Ham" <km4ik.ian at gmail.com> wrote:
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html