[Elecraft] K3/KPA500/KAT500 - Band Decoder for Antenna Switching

[Phil Hystad]

Rich,

I am curious as to what you are switching.

If you have 3 antennas and the K3, KPA500, and eventually  KAT500, isn't that all you need?

At least that is my plan.  I have an Array Solutions SixPak right now that I use for antenna
switching but since I have three antennas I use for different bands, the KAT500 should work
perfectly as an antenna switch.

Or, are your three antennas for the same band?

Curious...

73, phil, K7PEH


On Nov 4, 2012, at 11:57 AM, rich kennedy <astro_maryland at yahoo.com> wrote:

> Hello, I currently have a K3 & KPA500, and, shortly I hope, a KAT500.  I have 3 antennas that I electronic switch with a DXEngineering RR8HP Remote Antenna Switch by manually selecting them on the DXEngineering Antenna Control Console.
> 
> I wish to have some kind of band decoder and electronic switch that can replace my manual Antenna Control Console so switch the K3, the KPA500, and the KAT500 all seamlessly. 
> 
> What are Elecraft users recommending?   Thanks, 73, Rich, K3VAT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html