[Elecraft] KAT500 Rev A manual up on web page

[iain macdonnell - N6ML]

I think if you study the arrangement of pins in the diagrams, you'll
find that they are correct (the female ones appear to "point" to the
right) .. what's inconsistent is the type of circles representing the
pins/receptacles.

73,

    ~iain / N6ML


On Fri, Nov 2, 2012 at 4:53 PM, Randy Farmer <w8fn at tx.rr.com> wrote:
> I was looking at the cabling diagram in the manual and it appears that
> the drawings for the AMP and XCVR have the wrong sex on the jacks.
> Unfortunately, unlike the descriptions in the K3 and KPA500 manuals
> there is no text in the manual specifying the connector sex. If they're
> really like the drawing shows, you would need a DE15 cable with male
> connectors on both ends and a DB15 cable with female connectors on both
> ends. It appears to me the XCVR jack should be a DE15 female and the AMP
> jack should be a DE15 female. Then the two cables could be the same,
> with a different sex connector on each end.
>
> 73...
> Randy, W8FN
> On 11/02/2012 11:12, Eric Swartz - WA6HHQ, Elecraft wrote:
>> The new Rev A KAT500 manual is now on our manual download page at:
>> http://www.elecraft.com/K2_Manual_Download_Page.htm#kat500
>>
>> 73,
>> Eric
>> ---
>> www.elecraft.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html