[Elecraft] K3 psk D splater

[David Moes]

Power is fine at the rig   drops to 13.4V at 25W key down  and 12.6V at 
100W

no I do not have a filter on the serial port but RF in the shack is low 
and I've never had any other issues with serial during transmit.   and 
while sending it had no issues with the text.    he was just commenting 
on many bars on the PSK signal.

On 5/30/2012 3:44 PM, Adrian wrote:
> I use PSK - D with Kcomm or K3 utility all the time for rtty .
> Can you tell me what your indicated K3 voltage is on K3 screen?
> What is the indicated voltage on 25w key (cw constant keyed) on K3 screen?
> Do you have a Coilcraft DLFC15 filter in your rs232 line?
>
>