[Elecraft] P3 - K3 - N1MM

[Bill Conkling]

I am not certain, but I suspect you have made a very easy to fix error.  I
will assume that you have N1MM working with your K3 prior to adding the P3.
And you have the connected the computer to the computer port on the P3 with
the appropriate RS-232 cable/adapter.  If so, read on....

The P3 talks to the K3 at 38,400 baud, and I will guess you were using 9600
or maybe even 4800 before.  Reset the K3 baud rate to 38,400 and do the same
with N1MM, and you should be OK. The computer will usually automatically set
up to whatever baud rate some device tries to connect. I just checked, and I
can set my P3 to lower baud rates, but I suspect the response is better at
the recommended 38,400 baud.

Let me know....
nr4c at arrl.net

...bill  nr4c
 

-----Original Message-----
From: Lee Buller [mailto:k0wa at swbell.net] 
Sent: Saturday, May 26, 2012 1:00 PM
To: Elecraft Reflector
Subject: [Elecraft] P3 - K3 - N1MM


Just completed my P3 and have it up and running with the K3.  But....I
cannot 
control the rig through N1NN.  I have the P3 and the K3 hooked together with
the 
RS232 cable (a true one) and the computer ... AS PER THE INSTRUCTIONS.  I
can't 
get N1MM to see the K3.  Cannot find help in the instructions....

Anyone have an answer or do I have to not connect the P3 and the K3 together

with the RS232 cable.

Lee


 In our day and age it seems that Common Sense is in short supply.  If you
don't 
have any Common Sense - get some Common Sense and use it.  If you can't find
any 
Common Sense, ask for help from somebody who has some Common Sense.  Is
Common 
Sense divine?

Common Sense is the image of the Creator expressing revealed truth in my
mind. 
-  John W. (Kansas)

Never interfere with anything that isn't bothering you.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html