[Elecraft] cables for digital/dayton
va3bxg at gmail.com
va3bxg at gmail.com
Wed May 23 15:51:17 EDT 2012
I talked to wayne at dayton. And he said that was a plan.
Now the question is how long? With all the other stuff they are doing
Robert
a 'kosher' ham
Sent from my BlackBerry device
-----Original Message-----
From: Tom Azlin N4ZPT <tom at n4zpt.org>
Sender: elecraft-bounces at mailman.qth.net
Date: Wed, 23 May 2012 15:47:48
Cc: <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] cables for digital/dayton
Hi Bob,
One of the Elecraft guys said they did plan to provide some sort of
jumper cables. Maybe even they could provide right angle connectors of
the various types used on the KX3.
I just decided to not way. and yes, I got the same kind Mouser sells.
73, tom n4zpt
On 5/23/2012 3:10 PM, Bob wrote:
> Thanks Tom,
>
> "On my simply interface I just did not connect the two PTT lines and use
> the USB to KX3 cable to control the KX3 via CAT." That sounds like good
> advice and therefore I will leave it disconnected as well, as I
> certainly will be using the CAT cable at the same time anyway.
>
> Yeah, the right-angle connectors I purchased from Mouser have plastic
> covers that snap in place, that the moment a wire is installed through
> the cover, it cover unsnaps. That is the biggest advantage to buying a
> pre-made cable -- they are insert molded and strain-reliefed.
>
>
> I know that Elecraft has their hands full, but providing right-angle
> adapter cables, and perhaps prewired molded connectors with short
> unterminated cables for the Mic might be a reasonable thing to offer as
> an optional purchased "Connector Kit". As you said, none of the TRRS
> cables I have found have the shield tied to the shell, and the quality
> of the "blank" connectors is dubious at best.
>
> Thanks for the good suggestion.
>
> 73, Bob, WB4SON
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list