[Elecraft] Starting values for AGC with MCU 4.51 ???

[Brian Alsop]

Have you tried these settings?  It's easy to do with a signal generator.
You might not like them.

 From what I can tell your settings kick in the AGC at S9.  At that 
point you have about 54db of audio change from weakest to strongest.
It then goes up from there.  How much depends upon how Elecraft has 
warped the slope so your ears don't get blown up.

The AF limiter will probably kick in often and produce a horrible 
sounding signal to save your ears.

The strategy to fiddle with AF/RF controls to keep AF levels acceptable 
always seemed an added chore that the radio should be doing.

73 de Brian/K3KO


On 5/23/2012 00:31, Dave Hachadorian wrote:
> I'll be in the WPX CW this weekend, using the rare prefix call
> sign KZ7X.  I'm hoping for some good pileups to test things out!
>
> I'll be using these settings:
> agc dcy soft
> hld 0.2
> pls nor
> slp 0
> thr 20
> f 200
> s 020
> af lim nor 030
> front panel  agc fast
> Use min preamp, max attenuator, and min rf gain to keep weak
> signals just clearly readable.
>
> My idea behind those settings is to keep dynamic range as high as
> possible before agc even begins to actuate.
>
> If agc compression becomes a big issue, I will try turning agc
> off, and setting rf and af gain to keep signals in the range
> where they need to be (weak signals readable, and loud signals
> below the AF Limiter).  I have a new sensitive headphone setup,
> and new sound deadening in the amplifier that may help in this
> regard.  Thanks to K3NA for this idea:
> http://wiki.contesting.com/index.php/Setting_receiver_gain_controls
>
> That's my plan, and I'm stickin' to it!
>
> Dave Hachadorian, K6LL
> Yuma, Arizona
>
>
>
>
> -----Original Message-----
> From: Peter Chamalian
> Sent: Tuesday, May 22, 2012 2:48 PM
> To: 'Jack Colson' ; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Starting values for AGC with MCU 4.51 ???
>
> I have not had a sufficiently large or loud pile up to test the
> AGC mods
> under "battle conditions".  Perhaps this weekend...
>
> I have my AGC values all set at the default levels except AGC THR
> which is
> 13.
>
> I'll be interested to hear what others are doing.
>
> Pete, W1RM
>
>
> -----Original Message-----
> From: Jack Colson [mailto:jcolson7 at tampabay.rr.com]
> Sent: Tuesday, May 22, 2012 5:19 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Starting values for AGC with MCU 4.51 ???
>
> With all the comments about the upgraded or improved AGC is their
> a
> consensus as to starting values?  I realize that these can be
> tailored for
> specific situations but a default starting set would be helpful.
>
> Thank you in advance,
> 73,
> Jack, W3TMZ
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2176 / Virus Database: 2425/5015 - Release Date: 05/22/12
>
>



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2176 / Virus Database: 2425/5017 - Release Date: 05/23/12