[Elecraft] P3 +12V mod for K3

[Vic K2VCO]

Everyone probably already knows this, but if the solder doesn't wick easily out of the 
hole, add a little fresh solder first. This made all the difference with the board in the K3.

On 5/18/2012 1:59 PM, Paul Saffren N6HZ wrote:
> Although a vacuum desolder station was available to
> me, I just used SolderWik.

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/