[Elecraft] K3 - RX audio degradation with ANF

[Gary Gregory]

*Don,

your not alone but I guessed it was Auto-Notch Filter..:-)

Bill is correct though, there is distortion when I have AGC=12 and SLP=2
but if I go to AGC=8 it appears to be almost gone.

Not sure why this is?

73's
Gary
*
On 18 May 2012 22:12, Don Wilhelm <w3fpr at embarqmail.com> wrote:

> Bill,
>
> Please enlighten me - I have searched through the K3 manual, and do not
> find anything labeled "ANF"
> If you would please give whatever you are trying to run the same label
> used in the K3 manual perhaps we can provide some answer.
>
> 73,
> Don W3FPR
>
> On 5/18/2012 7:52 AM, Bill wrote:
> > I am reposting this question, as I received no responses the first time:
> >
> > I generally only use the ANF when it is needed. I do not run it all the
> > time. The reason I do not run the ANF all the time is a slight
> > degradation of the quality of the SSB received audio when it is engaged.
> > Although it does not interfere with the intelligibility of the audio -
> > it does introduce a fuzzy aspect to otherwise armchair copy.
> >
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
Gary
VK4FD - Motorhome Mobile
Elecraft Equipment
K3 #679, KPA-500 #018
Living the dream!!!