[Elecraft] KX3 and PTT

[Don Wilhelm]

Jim,

That is what I plan when I get a "round tuit"

73,
Don W3FPR

On 5/14/2012 1:05 PM, James Robbins wrote:
> Wayne,
>
>
>
> I saw your below note on setting up a foot switch PTT via the ACC2 jack.
>
>
>
> As an alternative, and if I am not using the MH3, is there any problem to
> accomplish the same PTT function by building a jumper from a TRRS 3.5mm plug
> (into the MIC jack) to two mono in-line jacks where the pins of the plug are
> split into the two which support the mic (tip and sleeve) and those which
> support the PTT (ring 1 and ring 2)?  I'm planning to use a Heil
> headphone/mic with a foot switch for home use.
>