[Elecraft] Audio Settings

[Don Wilhelm]

That depends on your microphone.
Do it like the manual says.  You can do it in TX TEST so you don't 
bother others on the air.
First turn compression to zero, then adjust the mic gain until you see 7 
bars on the ALC display.
Then increase compression as desired - usually 10% is good.

73,
Don W3FPR

On 5/13/2012 9:10 PM, Ted Edwards W3TB wrote:
> What have people found to be good levels for the microphone and compression
> on SSB?
> Thanks!
>