[Elecraft] k3 and field day
Tom Azlin N4ZPT
tom at n4zpt.org
Fri May 11 13:43:06 EDT 2012
The K3 configuration utility is handy that way! ( same with the KX3
configuration utility).
73, tom n4zpt
On 5/11/2012 1:13 PM, Rose wrote:
> Been there, done that, as they say ... (;-)
>
> If you still want to do it, I strongly suggest you copy all
> the radio's parameters to a laptop so you can "fix" it on
> the fly.
>
> My K3 no longer goes to FD ...
>
> 73!
>
> Ken -K0PP
>
> On Fri, May 11, 2012 at 5:04 PM, Anthony Scandurra K4QE<k4qe at att.net>wrote:
>
>> David,
>>
>> This applies to ANY competition class radio, not just the K3.
>>
>> I strongly recommend AGAINST bringing out your radio out unless you know
>> for
>> a fact that those who will be using it know how to use it already.
>>
>> If it is a free-for-all, you should only take out a radio that is
>> dead-simple to operate like an ICOM IC-718, a Yaesu FT-840, or a Yaesu
>> FT-747.
>>
>> Otherwise, you will be constantly be asked questions and/or really
>> frustrating operators. Even worse, they might get the radio into some
>> state
>> rendering it unusable (yes, it DOES happen) and without a quick resolution
>> because you won't know exactly what they changed.
>>
>> Sorry, but it is really not worth your trouble unless you know the
>> operators
>> are K3-aware.
>>
>> 73, Tony
>>
>> -----Original Message-----
>> From: dmoes at nexicom.net
>> Sent: Friday, May 11, 2012 12:29 PM
>> To: elecraft at mailman.qth.net
>> Subject: [Elecraft] k3 and field day
>>
>> I will have my k3 at Field Day this year and would like a little
>> advice. I will have the Yamaha cm500, a hand held mic plus a set
>> of paddles. It will have one multiband antenna. plus a will
>> periodically be connected to a beam when its available.
>>
>> Since it will also be used by several other ops that probably wont
>> know the K3 I would like to set it up as user friendly as possible and
>> lock out as much as possible in the menus to prevent it from being
>> messed up.
>>
>> What settings have others used in this situation. and what
>> precautions are there? and any other thoughts please.
>>
>>
>>
>> Please answer to the reflector and not directly to me.
>> David Moes
>>
>> VE3DVY
>>
>>
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
More information about the Elecraft
mailing list