[Elecraft] K2 and Aether logging software for mac

[Don Wilhelm]

Steve,

If you have the K2/100, all you need is the proper cable to a serial 
port.  If you have a K2/10 then you need the KIO2 in your K2.  If there 
is a DB-9 connector in the AUX IO location,  you have it (unless the 
prior owner just installed a connector to fill the hole).
DO NOT connect a standard serial cable to that connector - it contains 
internal signals for attaching transverters, the KRC2, etc.  You must 
use the special cable shown in the KIO2 (or KPA100) manual

You may need a USB to serial adapter - get one that will run reliably at 
4800 bps, many do not.

73,
Don W3FPR

On 5/10/2012 12:18 PM, Stephen Roberts wrote:
> I just got a K2 and want to hook it up to my logging software on my iMac. What do I need to do that?
>
> Steve
> W1SFR
>