[Elecraft] RX I/Q output planned or thought about for the K3/P3?

[Mike Schwendeman]

FOURTH try… (!!)
This time, I have copied the text, and placed it into a text editor. I 
converted (saved it as) a plain TEXT DOCUMENT. (Maybe some formatting 
has entered..?)

I have also removed all TABS, which were in the previous attempts.

I am making this latest attempt on a different machine, different OS, etc.

Mike
KØJTA

The "THird try" below was sent my be at 10:17 AM, central time.
==============================

Third try... (Still am puzzled by my two previous attempts that showed 
that I had posted, but there was no content.) Art, I am CC'ing this to 
you, also; Can you identify my error, please? (Thank you.)
-Mike- KØJTA
=== (The following was sent by me at about 0936, my time) =========

Hmmm.... For some reason, the TEXT of this email (sent at my time of 
09:23 AM) was not viewable on the Elecraft reflector. (!) I will trim a 
bit off, and see if this helps.
-Mike- KØJTA


On 5/9/12 9:23 AM, Mike Schwendeman wrote:
Hi, Art;

I may be wrong on this, but I have (in the past) looked at each and 
every page on the Elecraft web site, looking for "SDR" and "defined" and 
the like. I was unable to locate these (or similar) terms. Had I missed 
a page?

I am ASSUMING that the good folks at Elecraft would be extremely happy 
to use the coveted "SDR" term in the description of the K3. Yet, I have 
missed it, if it is there.

To me, the K3 is not an SDR for so many reasons, to be GENTLY honest. 
The KX3 is an SDR, per the block diagram, however.

-Mike-

On 5/9/12 8:52 AM, Arthur Burke wrote:
The folks at Elecraft *have* mentioned this - they have often made 
reference to it as an SDR - not that it really matters to me one way or 
the other.

Art - N4PJ



On Wed, May 9, 2012 at 9:01 AM, Mike Schwendeman ‪<mike at s3com.net>‬ wrote:
Geoff;

As far as I know, the K3 is NOT an SDR........... (Snipped) ...........