[Elecraft] RX I/Q output planned or thought about for the K3/P3?

[Mike Schwendeman]

Geoff;

As far as I know, the K3 is NOT an SDR.  (Search the Elecraft web site 
for better information; If it were an SDR, I am very sure that the folks 
at Elecraft would be very sure to mention this.)  The KX3 is reported to 
be an SDR, and is, per the block diagram.

I am also very interested in an "easy way" to get a version of PowerSDR 
to operate with the KX3's I/Q outputs.  This is a very new field for a 
lot of folks, and so there will be a learning curve.  But the results 
are well worth the effort.  (Me, I'm fighting mirror images on some 
apps, using a low-cost SDR RX..!)

73;    -Mike-    KØJTA


On 5/8/12 10:14 PM, Geoff Wolf AB3LS wrote:
> I've done a little searching.....
> ........ (snip) ........
> Since the K3 is an SDR and the P3 is an SDR, I imagine there has to be a
> way to get I/Q data to a computer from either of them, either through a
> software update or an extra module. Am I right?
>
> Is anything like this planned?
>
> 73
> DE AB3LS
>