[Elecraft] KPA3 misbehaving
W0MU Mike Fatchett
w0mu at w0mu.com
Fri May 4 23:42:38 EDT 2012
Didn't someone else have this issue recently? What is your serial
number. I believe there were issues with the pins on this board.....I
could be mistaken. DeOXit might be a cure.
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 5/4/2012 9:38 PM, Steve Reed wrote:
> Today my trusty K3 developed a strange and sudden problem -- I can't turn
> the power output past 12 watts -- the KPA3 isn't clicking in! It was
> working perfectly yesterday, but today not so well. Went through all the
> menus, even tried resetting the radio from scratch and re-enabling the KPA3
> in the config menu. The fan test works fine, and the PA test works fine
> too (I can hear the relay click). But going past 12 watts with the power
> control no longer works.
>
> Anyone seen this before and know what the cause may be?
>
> Steve, AI7AZ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list