[Elecraft] question for psk users
Joe Subich, W4TV
lists at subich.com
Thu May 3 08:51:12 EDT 2012
On 5/2/2012 1:07 PM, David Moes wrote:
> You are assuming that everyone has the luxury of narrow roofing
> filters and can filter out the week and reject unwanted strong
> signals. most PSK stations are not blessed with a K3 and are not able
> to suppress strong signals. before I had a K3 2.4 was the narrowes I
> could do. most afordable rigs today still stop at 3khz (FT950) and
> some even wider.
That's not true. Every rig manufactured today provides a CW filter
option that works very well for reducing/controlling the AGC blocking
issue. The FT-950 provides selectivity down to 500 Hz in its "PKT"
modes as do many other "affordable" rigs.
73,
... Joe, W4TV
On 5/2/2012 1:07 PM, David Moes wrote:
> You are assuming that everyone has the luxury of narrow roofing
> filters and can filter out the week and reject unwanted strong
> signals. most PSK stations are not blessed with a K3 and are not able
> to suppress strong signals. before I had a K3 2.4 was the narrowes I
> could do. most afordable rigs today still stop at 3khz (FT950) and
> some even wider. You should use as little power as possible to
> conduct your QSO. where I come from that is the law. using high
> power to conduct a PSK31 qso is rarely necessary. most other PSK
> users are running less than 30 W and if you can hear them you probably
> don't need 100+ watts to talk back. I agree that it is needed in
> some cases but one should only shout when you need to and talk normal
> or even whisper if you can.
>
>
>
> David Moes
> VE3DVY
>
>>
>> The reason why a strong signal will "annihilate all the other PSK
>> signals" is that most users are trying to receive an entire 2.5kHz
>> bandwidth in one gulp. This means that even one strong signal within
>> that bandwidth will activate the AGC and drive all the other signals
>> down.
>>
>> Regrettably most PSK users don't understand what is happening, so they
>> have to rationalize it into simpler terms like "It's a crime to be
>> loud."
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list