[Elecraft] cable management

[Edward R. Cole]

I would guess my station is not "typical", but after several station 
setups in different houses,  I decided to have my radio desk set out 
from the wall three feet so I could walk in back for dressing cables 
or making changes (which is continuous in my station).  Its messy 
because of that.  I bought a 4x8 sheet of peg board and have it on 
the back of the table for securing cables.  Run a tywrap thru two 
adjacent holes make it easy and fast to secure wiring.  Most coax is 
not connected to the peg board since things are still unfinished.  I 
need more coax switches/relays to reach that state.  Here's link with 
several photos of the station (thru the years):
http://www.kl7uw.com/station%20layout.htm


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
DUBUS Magazine USA Rep dubususa at gmail.com
"Kits made by KL7UW" http://www.kl7uw.com/kits.htm
======================================