[Elecraft] P3SVGA Question

[W6NEK]

Hi Toby,
What you describe is not what I am seeing on my P3/P3SVGA scope.
On the P3 screen with P3 Span set to 5 KHz the "Green" bandwidth display
(Bar or U ) varies in width proportional to the K3 bandwidth setting.  It is 
still
visible with bandwidth set to a minimum of 50 Hz.  The exact same Bar 
Display is
duplicated on the P3SVGA display.  What you are experiencing does not sound
normal.  Perhaps a P3 guru can shed some light on what you are experiencing.

Frank - W6NEK

----- Original Message ----- 

From: "Toby Pennington" <toby423 at embarqmail.com>
To: <Elecraft at mailman.qth.net>
Sent: Sunday, March 25, 2012 5:31 AM
Subject: [Elecraft] P3SVGA Question


> Got the P3SVGA yesterday and have it running ok.
>
> Looks Great!
>
> I am using a Sony 15 inch monitor and notice on cw that the green marker 
> basically diasppears whenever the BW on the K3 is turned lower than 20 hz. 
> I have tried all the different resolutions and it makes no difference.
>
> The green marker on the P3 itself stays the same at any passband  width 
> setting.
>
> Has anyone else observed this ?
>
> Toby  W4CAK
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2114/4893 - Release Date: 03/25/12
>