[Elecraft] cable management

[Keith Heimbold]

The best set up in terms of cable management I have seen in my short time as a ham is at the San Diego Yacht club. I would love to get my shack wired up like they got it. It is a thing of beauty. 

My set up is a rats nest with my quadra and my king conversation multiple antennas and y connectors, lp pan, multiple rotators, soon to have SteppIR SDA-100, etc. need to find some semblance of order in the emerging chaos.

Keith
AG6AZ

Sent from my iPhone please excuse typos

On Mar 25, 2012, at 8:21 AM, "KU7Y" <ku7y.cw at gmail.com> wrote:

> I remember back in the early 50's, must have been before I went into the 
> Army in 54.
> 
> One of the magazines, either QST or CQ, had some pictures of Don, W6AM's 
> shack.  All those big 19" relay racks full of equipment and pictures of the 
> little "room" behind it to keep it all serviced.
> 
> I said that someday I'd have room to walk behind my set up too......  still 
> hasn't happened but maybe some day......   :-)
> 
> OK, back in my hole,
> 
> Ron, KU7Y
> SOWP 5545M
> Arizona Outlaws Contest Club
> Brenda, AZ (Winter)
> Caldwell, ID (Summer)
> ku7y at qsl.net
> http://www.hatpinsandmore.com
> ----- Original Message ----- 
> From: "Pete Smith N4ZR" <n4zr at contesting.com>
> To: <elecraft at mailman.qth.net>
> Sent: 25 March, 2012 4:03 AM
> Subject: Re: [Elecraft] cable management
> 
> 
>> Or you can put one of those mirror tiles against the wall behind your
>> radio.  That said, I would give almost anything for enough room in my
>> shack to have a 24 inch walk through behind my station.
>> 
>> 73, Pete N4ZR
>> The World Contest Station Database, updated daily at 
>> www.conteststations.com
>> The Reverse Beacon Network at http://reversebeacon.net, blog at 
>> reversebeacon.blogspot.com,
>> spots at telnet.reversebeacon.net, port 7000 and
>> arcluster.reversebeacon.net, port 7000
>> 
>> 
>> On 3/25/2012 6:14 AM, Bill W4ZV wrote:
>>> Pierfrancesco Caci wrote
>>>> Pulling out the K3 is sort of doable, but putting it back in
>>>> position is a real pain.
>>>> 
>>> This mirror image of the rear panel may help:
>>> 
>>> http://www.n5na.net/download/k3_rear_panel_mirror.pdf
>>> 
>>> 73,  Bill
>>> 
>>> --
>>> View this message in context: 
>>> http://elecraft.365791.n2.nabble.com/cable-management-tp7402003p7403215.html
>>> Sent from the Elecraft mailing list archive at Nabble.com.
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html