[Elecraft] anyone running HRD with Signalink & K3 help

[Ian Kahn - Ham]

Gerald,

First thing I'd check is in the HRD soundcard properties.  Make sure it 
is set for the SignaLink, not the computer's sound card.  It should read 
"USB Audio Device", or something similar and equally generic.  Also, do 
you have the correct cables connected to the K3?  The radio end should 
have three plugs, one each for line in, line out, and keying.  Make sure 
they are correctly connected to the K3, and that the K3 is set for MIC + 
Line In in the microphone settings in the MENU.

Hope this helps.

--Ian

Ian Kahn, KM4IK
Roswell, GA
km4ik.ian at gmail.com
K3 #281, P3 #688


On 3/24/2012 7:10 PM, KC6CNN wrote:
> I installed the HRD 5.11a build with a signalink and keep getting a
> microphone failed error.
> It says microphone failed the 48hz and 8hz I/O test
>
> Can seem to change the setting right. also the ptt is set for roc even thou
> I tell it to let the signalink control it. defaults back to roc.
>
> Any help would be greatful.
>
> Thanks
> Gerald - KC6CNN
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/anyone-running-HRD-with-Signalink-K3-help-tp7402171p7402171.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html