[Elecraft] P3SVGA 1920x1080

[Mike K2MK]

Hi Bruce,

Although not a direct answer to your question I would like to indicate that
on my 17" monitor I have noted in the monitor information box that the
P3SVGA is operating at 1280x1024 at 58Hz and the monitor indicates that optimum
is 1280x1024 at 60Hz. (It only reports a single scan rate). I can also report
that I am not experiencing any reduction in overall size. The display width
on the monitor is identical to the display width on the P3. My monitor is a
Dell 1702FP.

73,
Mike K2MK


Bruce Beford-2 wrote
> 
> I have been unable to get my P3SVGA working at full resolution (1920x1080)
> on my Acer H243H monitor. For now, I am running at 1440x900.
> 
> The Acer H243H monitor does support 1920x1080, from both the DVI and SVGA
> inputs. I have used my HP dv7 laptop to drive the SVGA input at 1920x1080.
> It displays properly, and the monitor reports the following:
> 1920x1080 H: 67 KHz V: 60 Hz
> 
> When I try to use the P3SVGA at the same resolution, the display appears
> to
> extend off the right side of the monitor, showing an incomplete spectrum.
> The monitor reports:
> 1920x1080 H: 66 KHz V: 58 Hz
> 
> So, this monitor will work at 1920x1080 with one source, but not the
> P3SVGA
> at this (odd) scan rate(?) Hopefully, this can be resolved with an FPGA
> file
> update. 
> 
> I would like to hear from other P3SVGA users who are successfully using
> 1920x1080 resolution. I would like to know the monitor make/model, and
> what
> the monitor reports for horizontal and vertical scan rates. This is
> usually
> accessible from the monitor's menu.
> 
> 73,
> Bruce, N1RX
> 


--
View this message in context: http://elecraft.365791.n2.nabble.com/Re-P3SVGA-1920x1080-tp7397134p7401457.html
Sent from the Elecraft mailing list archive at Nabble.com.