[Elecraft] K3 ERR TXF

[Don Wilhelm]

Julius,

ERR TXF indicates that the wrong filter is selected for SSB.  It must be 
the 2.7 or 2.8 kHz filter.
You can check usijng K3 Utility or directly with the K2 menu.

73,
Don W3FPR

On 3/23/2012 8:59 PM, Julius Fazekas n2wn wrote:
> Made a couple SSB QSOs prior to the start of WPX and one QSO in the contest
> itself, but now am getting ERR TXF anytime I try to key the rig. Also, not
> getting any power out to speak of. the pre contest QSOs were LP, the first
> contest QSO QRP.
>
> Checked all the settings, both directly and with the utility, everything is
> set correctly. Tried a reboot, power recycle and reloading the firmware.
> Nada.
>
> Any method of keying in either SSB mode triggers the error message (PTT,
> VOX, DVR). I do have the KDVR3 in this rig, if that makes a diff...
>
> Looks like it works fine on CW, power moves from QRP to LP.
>
> Any suggestions?
>
> Thanks,
> Julius
> n2wn
>
> -----
> Julius Fazekas
> N2WN
>
> Tennessee Contest Group
> http://www.k4ro.net/tcg/index.html
>
> Tennessee QSO Party
> http://www.tnqp.org/
>
> Elecraft K2        #4455
> Elecraft K3/100 #366
> Elecraft K3/100
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-ERR-TXF-tp7400316p7400316.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>