[Elecraft] K3 reset/reboot

[Vic K2VCO]

I second this advice! Pull the front panel board and push it back into place.

On 3/23/2012 5:52 PM, Tony Estep wrote:
>>
>>> A common cure for this symptom is that one of the buttons on the front>panel
>>> might be stuck....
> ==========
> Or maybe the front-panel connector has a pin that isn't making
> contact. Maybe if you open it up and wiggle the front panel board....?
>
> GL,
> Tony KT0NY
>
>
>

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/