[Elecraft] P3SVGA Display Pan Level Change When Turning VFO A or B

[Vic K2VCO]

I've noticed the same thing -- in tracking mode, but not fixed mode. I don't know the 
reason for it and I'm pretty sure that there's nothing you can do about it. You might see 
if you like fixed mode, which I greatly prefer.

On 3/23/2012 4:15 PM, W6NEK wrote:
> Hello fellow owners of the P3SVGA Display Board, I must be missing a menu setting.
> Whenever I tune either the main or sub VFO the external VGA average pan display trace
> drops from -120 dbm to -135 dbm all the while the VFO is changing frequency.  This
> makes it all but impossible to visually tune to a weak CW signal by just watching the
> VGA pan display as you tune the VFO.  Each time I stop tuning the pan display jumps
> back up to the -120 dbm reference line and all the weak signals once again appear in
> the pan display.  This does not happen on the small screen pan display.  Is there a
> separate menu adjustment that prevents the VGA pan display level from dropping -15 dbm
> when the either receive VFO is tuned?  I just know I have something set up wrong in the
> menu system.
>
> Any input welcome, Frank - W6NEK
>
> ______________________________________________________________ Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email list:
> http://www.qsl.net/donate.html

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/