[Elecraft] P3 SVGA Utility (Mac)

[Paul Saffren N6HZ]

Hi Bill, 

It is my understanding that a version is in the works. 

73, 

Paul


w4ish wrote
> 
> Will there soon be the P3 Utility SVGA for the Mac? I discovered the hard
> way that if you update the P3 Software to 1.12 via the Mac Utility, it
> introduces strange bugs into the SVGA operation. (Like putting the noise
> Ref Lvl to -45 dBm on the large monitor while it was -90 on the P3, and it
> could only be corrected by tuning about 2 MHz off frequency with the VFO
> knob and then slowly tuning back to your frequency of interest.)  Luckily
> I had VMWare on my mac, so I could use the Windows version of the updated
> Utility!
> Bill
> W4ISH
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at .qth
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 

w4ish wrote
> 
> Will there soon be the P3 Utility SVGA for the Mac? I discovered the hard
> way that if you update the P3 Software to 1.12 via the Mac Utility, it
> introduces strange bugs into the SVGA operation. (Like putting the noise
> Ref Lvl to -45 dBm on the large monitor while it was -90 on the P3, and it
> could only be corrected by tuning about 2 MHz off frequency with the VFO
> knob and then slowly tuning back to your frequency of interest.)  Luckily
> I had VMWare on my mac, so I could use the Windows version of the updated
> Utility!
> Bill
> W4ISH
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at .qth
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


--
View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-Utility-Mac-tp7398110p7399322.html
Sent from the Elecraft mailing list archive at Nabble.com.