[Elecraft] K3/KX3 Programmer's Reference revision D6 now available

[Dave Anderson, K4SV]

Hi Wayne,


So to extrapolate a bit, would there be a KX3/0 in the works to control a K3?
 
Dave Anderson, K4SV
Tryon, NC
 828 777-5088
 
www.K4SV.com
 



>________________________________
> From: Wayne Burdick <n6kr at elecraft.com>
>To: KX3 at yahoogroups.com 
>Cc: Elecraft Reflector <elecraft at mailman.qth.net> 
>Sent: Wednesday, March 21, 2012 3:19 PM
>Subject: [Elecraft] K3/KX3 Programmer's Reference revision D6 now available
> 
>The KX3 and K3 have very similar remote-control command sets. Both are  
>covered by the "K3/KX3 Programmer's Reference," available here:
>
>    http://www.elecraft.com/manual/K3&KX3%20Pgmrs%20Ref%20D6.pdf
>
>In general the KX3 executes the entire K3 command set. Exceptions are  
>noted in the document. The KX3 also has a few new commands of its own.
>
>73,
>Wayne
>N6KR
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>