[Elecraft] K2 cannot calibrate dial

[Don Wilhelm]

Bartek,

I am happy o hear of your success.
If you attempt that in the future and must use a carrier of known 
frequency as your standard, let me give you some information on how to 
counter the K2 RX offset during that procedure.

73,
Don W3FPR

On 3/13/2012 6:00 PM, Bartek SQ5OBP wrote:
> Hi Don,
>
> I was using SSB mode to set C22. My CW sidetone was set to 600Hz.
> After all, after re-setting C22 to its mid-point position I have done all
> the basic alignment steps from Part II of the Manual and done CAL FIL and
> CAL PLL and the problem was resolved.
> Thanks for your help guys!
>
> 73,
> Bartek SQ5OBP
>