[Elecraft] P3 MCU 1.11

[Joe Subich, W4TV]

Greg,

Not the case ... setting level on one band then changing bands results
in the new level on all bands.  Not a good situation when the noise
floor varies from -140 dBm on 50 MHz to nearly 100 dBm or more on 1.8
MHz.

73,

    ... Joe, W4TV


On 3/13/2012 1:48 PM, Greg wrote:
> Detlef,
>
> Maybe this got reset by the download?  Please adjust by band as needed
> then shut everything down.  Turn it all back on and see if your
> settings were retained.
>
> Thanks
> Greg
>
>
> On 3/13/12, Detlef Fischer<dk1kl at t-online.de>  wrote:
>>   Hi to all,
>> Downloaded the new P3 Version 1.11.  All works fine except the REV LEV
>> values are not stored per band any more. The level is equal on each band.
>>
>> Some wrong with my P3 or is it a bug?
>>
>>
>>
>>
>> Detlef / DK1KL
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>