[Elecraft] FW: P3 Windows Utility Program 1.12.3.11

[Dick Dievendorff]

Thanks, Rick.

I think now it's related to operating at 115,200 bps.  I had a few flakey
results from time to time at that speed as well.

I use an ABCD switch and about 15 feet of RS-232 jumper cables between my PC
with an old KUSB USB to Serial adapter and the various Elecraft devices.
It's been solid up to 57,600 but a little dodgy at 115,200.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Richard S. Leary
Sent: Monday, March 12, 2012 9:09 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] FW: P3 Windows Utility Program 1.12.3.11

Works fine here also. Loaded K3 F/W Beta 4.48, then P3 Utility 1.12.3.11,
then used it to upgrade P3 F/W to Ver 1.11. Did screen capture, OK. But I
still do not have a P3SVGA on order yet. No problems with downloads, but I
make sure to run a serial cable directly from the PC to the K3, download
F/W, then switch the cable from the K3 to the P3 and download F/W again.
Nothing in between the equipment and the PC. Do not put a microKEYER in
between, it doesn't work. Been there, done that. Just ask Joe. Oh yes,
running Win 7/64bit.

Thanks Elecraft for a K3/100K and P3 that have NEVER failed in almost 2
years. Good "ears", good power, good knobs. I love 'em.

73, Rick, W7LKG

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill Conkling
Sent: Monday, March 12, 2012 19:47
To: w5pny at w5pny.com; elecraft at mailman.qth.net
Subject: Re: [Elecraft] P3 Windows Utility Program 1.12.3.11

I loaded P3 Util 1.12.3.11 tonight and captured a screen, and it is on my
computer.

...bc  nr4c

-----Original Message-----
From: Harry G McGavran Jr [mailto:w5pny at w5pny.com]
Sent: Monday, March 12, 2012 8:51 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] P3 Windows Utility Program 1.12.3.11


This past weekend I loaded the 1.11 firmware onto my P3 and today I
installed the 1.12.3.11 utility program on my Windows XP SP3 machine.

When capturing an image, the File->Save As only stays highlighted for a
brief time and using it looks like it should be saving a file when clicking
OK to the file window that pops-up with the File->Save As, but no file is
saved.

This worked correctly with the previous version of this utility.

Is anyone else having this problem??

-- 

Harry G. McGavran, Jr.

E-mail: w5pny at w5pny.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html