[Elecraft] [K3] 8-pin to stereo mic cable?

[John Shadle]

I should've clarified. I'm using the Elecraft MD2 desk mic. It has a
Y-connector with a 1/4" jack (for the footswitch) connected to the
8-pin mic connector for the front of the K3 (or K2).

In order of preference, here is what I'm curious about their existence:
1. A 1/8" plug to the 8-pin mic jack to connect the 8-pin mic plug to
my MD2 (which also allows the footswitch to be used attached to the
Y-connector)
2. A 1/8" plug to the 8-pin mic jack to connect the 8-pin mic plug to
my MD2 (footswitch us connected to the RCA PTT on the rear, instead)

Thanks!
-john W4PAH

On Sun, Mar 11, 2012 at 9:58 PM, John Shadle <shadle at katzenfisch.com> wrote:
> Hi all,
> Are there any recommended 8-pin to stereo mic cables for the K3 (for
> moving the mic to the rear panel), or will just any old one do?
>
> Thanks!
> -john W4PAH
> Madison, WI