[Elecraft] K2 Keying niggle

[Don Wilhelm]

Jacob,

Try setting 8R Hold ON.  It sounds like it is set to NOR right now and 
with your extended T-R delay, you are hearing the receiver unmute before 
the delay time is finished.
See the K2 manual page 89.

73,
Don W3FPR


On 3/10/2012 11:20 AM, jacob chambers wrote:
> Cheers;
>
> I have noticed that when keying my K2 with the crystal filter cinched (200 hz-400) and my audio filter ON in either mode 1 or 2 (the K2 analog CW filter) in certain situations I get an annoying pop or "pssst" sound when sending. I have serial no. 2676 QRP K2 that has had the keying mod performed. I normally use 5 watts with a .12 ms transmit/receive delay. i I built the audio filter to spec and it all tested fine. Any ideas on what I could do to mitigate this minor annoyance?
>
> 73;
> Jacob K4JQV
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>