[Elecraft] KX3 dual-watch working (ahead of schedule!)

[Sam Morgan]

the big difference with using the VE7CC pgm to access the VE7CC cluster or
using DXLabs spot collector to access the VE7CC cluster

With VE&CC pgm
if you click on a spot which has a split info entered in the comment field
in VE7CC the K3 will change VFO A to the spotted frequency
but does not change the K3's VFO B to the split frequency
nor does it place the K3 into split operations


if you are using DXLabs spotcollector  and commander
and click on that same spot
the K3 shifts the VFO A to the DX frequency
it also changes the VFO B to the split frequency
and places the K3 into split operation
also
if you have the 2nd receiver installed VFO B is also placed in sub

hope I said all that correctly

GB & 73
K5OAI
Sam Morgan

On 3/9/2012 2:55 PM, Jim McDonald wrote:
> I agree and wanted to mention that you can choose any telnet cluster in the
> Configuration-->Cluster (Telnet) list.  I prefer a node that uses VE7CC's
> node software, CC Cluster.  Telnet clusters are much more configurable than
> web clusters and send spots real-time rather that at pre-set intervals.
>
> I use CC User to feed the DXLab Suite, http://www.dxlabsuite.com/ , but CC
> User used standalone can interface with a K3 (it's in the Port Setup
> window).
>
> http://www.ve7cc.net/
>
> 73, Jim N7US