[Elecraft] G5RV antenna experience on K3
Rick Prather
k6limaecho at gmail.com
Fri Mar 9 14:26:57 EST 2012
I started off with a normal G5RV and the tuner handled it fine. But, it works better as an all band antenna with the tuner if you do what I did and eliminate the matching section (which only matches 20M's) and replace it with ladder or window line down to a balun or at least a current choke outside your shack with a short length of coax to the rig.
This set up lets the KAT3 comfortably tune all bands except 160.
Mine is at 35' and I worked 175 countries last year with the barefoot K3. Not bad for a minimal antenna.
Rick
K6LE
On 3/8/2012, at 10:38 , Dick Roth <raroth7 at gmail.com> wrote:
> Hi there--
>
> Am considering putting up a g5rv antenna and was wondering what
> experiences K3 users have with this antenna. Is an external tuner
> necessary? Is internal ATU3 up to the task of taming this wire?
>
> Any hints will be helpful
> --
> 73 de Dick, ka1oz
> Elecraft K3/100
> GAP Titan-DX Antenna
More information about the Elecraft
mailing list