[Elecraft] K144XV + K144RFLK issue

[Oliver Dröse]

Hi Simon,

can you check if the behaviour is the same if you unplug the 10 MHz source? 
I have the K144RFLK myself and don't see that behaviour but I do not use an 
external 10 MHz reference. To me it seemms like the jumps could be due to 
frequency correction calculations from the external reference. To confirm 
that just plug it off and see if it still is the same. Just a thought ...

Vy 73, Olli - DH8BQA
http://www.dh8bqa.de/




----- Original Message ----- 
From: "Simon Lewis" <gm4plm at hotmail.com>
To: <elecraft at mailman.qth.net>
Sent: Tuesday, March 06, 2012 10:31 AM
Subject: [Elecraft] K144XV + K144RFLK issue


>
>
> HI All
>
> I dipped into the Elecraft world again with a K3/10
>
> Plus Tvtr IF and K144XV
>
> Mainly as a transverter driver
>
> I bought the reflock for the radio and the transverter
>
> All is fine and my box is alive and well
>
> Just installed the K144XV and I notice an unusual change in receive freq 
> when looking at a local beacon on 144
>
> Every 3 secs or so it jumps about 10 Hz high or so then returns back to 
> its normal freq - then 3 secs later does the same again
>
> not sure why its doing this any advice appreciated
>
> I have done all the cal routines and the main unit has 10 MHz applied and 
> is locked - flashing * on the cal entry
>
>
> I only just purchased it so I assume the firmware would be the latest?
>
> Thanks
>
> Simon ZL4PLM
>
>
> Check out more information on the world 50 MHz and Up : www.zl4plm.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> eMail ist virenfrei.
> Von AVG uberpruft - www.avg.de
> Version: 2012.0.1913 / Virendatenbank: 2114/4852 - Ausgabedatum: 
> 05.03.2012
>