[Elecraft] Elecraft KX3 Owner's Manual now available(*preliminary*)

[Oliver Dröse]

> Wayne's suggestion that there may be a way to send an RTS signal to the 
> GPIO
> connection on the tip of the ACC2 plug is very intriguing, and I am just 
> trying to
> figure out what interface cable(s) I would use and what I would need to 
> build to be
> able to maintain the ACC1 operation along with the amp activation through 
> the ACC2,
> while adding the RTS line from somewhere to the tip of the ACC2 cable ;-)

Lance, what's the advantage of using the KX3's GPIO pin for PTT over the PTT 
line on the mic connector? You have to plug-in the audio cables for WSJT 
anyway and need a separate line for PTT on the computer side anyway, too. 
The only advantage I could see is you do not need an adapter on the 4 pin 
(TRRS) mic connector of the KX3, but that's about all. ;-)) Hw?

Vy 73, Olli - DH8BQA
http://www.dh8bqa.de/