[Elecraft] K3 amplifier board gold header mod

[Bruce Beford]

Sorry, My mistake. I went back to the schematics, and it looks like the 12V
level is sensed from the PA board, which would be after the suspect
connectors. Unfortunately, there is often no symptom until they
corrode/overheat enough to cause problems.

I apologize for my earlier misinformation. I should have double-checked the
schematics first.
73,
Bruce, N1RX

> Knut,
> Voltage is sensed on the main board, the power to the PA (via the
> troublesome connectors) is tapped off the main board. High resistance on
> these connectors do not affect the displayed voltage.
> 73, Bruce, N1RX