[Elecraft] Recalling power output levels with K3

[Don Wilhelm]

George,

You can set the menu for per-band power levels - see the K3 manual page 27.
With the KPA500 connected to the K3 with the AUX cable, there will be an 
additional per band power setting available.  See the KPA500 manual page 9.

73,
Don W3FPR

On 3/1/2012 11:43 AM, K4GM-George wrote:
> Does the K3 recall output levels ONLY when used with the KPA-500 or will
> it recall the levels for each band irrespective of the amp used ?
>
>