[Elecraft] K3; 8 volts with Mic Bias off.

[Don Wilhelm]

Is that 8 volts you are referring to on pin 1?  If it is still present 
with bias turned off, then you have a K3 problem, contact support.
There is always 8 volts on pin 6.

73,
Don W3FPR

On 3/1/2012 11:03 AM, Richard Fjeld wrote:
> My K3 is a year old.  I was going to try a dynamic mike and tested the pinouts first, and notice that the 8 volts is present either with bias on or off.  I'm using the front panel mike jack.  I don't dare connect the dynamic mic.
>
>
> Richard Fjeld, n0ce
>